CCTV – 20X IP Bullet Camera

Availability: In stock

$806.68

Category:Digital

CAMERA
Image Sensor	1/2.7″ Progressive Scan CMOS
Resolution	2048 (H) x1536(V)
Mini Illumination	0.01 Lux (Colour), (F1.6, AGC ON), 0.001 Lux (B/W) (F1.6, AGC ON)
Lens	f=4.3~86mm
IRIS	F1.6~F22
Angle of View	59.8°(wide) ~ 2.34°(tele)
Min Object Distance	10mm~1500mm
Optical Zoom	20x
Digital Zoom	16x
Electronic Shutter	1/1~1,30,000s
Day/Night	ICR (Auto, Color, black)
Focus	Auto, Manual, Semi- Auto
AGC	Auto, Manual
BLC	Auto, Manual
White balance	Auto, Manual
SNR	>65dB
WDR	Up to 140dB
Mirror Image	Level, Tilt, Centre
Noise Reduction	2D& 3D DNR
ROI	Support with 6 ROI level
Corridor Mode	Left /right rotation
Exposure Mode	Exposure Bias, Compensation, Gain Limit
Privacy Masking	8 Zones
Digital Image Stabilization	Support
NETWORK PARAMETER
Video Coding	H.264 (Mpeg-4 Part 10/AVC), H.265
Bit- Rate	32Kbps~16Mbps
Dual-stream	Support
Image Resolution	Main stream：2048×1536 ,1920×1080 Sub stream：704×576, 352X288 Image Stream: 1280X720 , MJPEG
Frame Rate	25/30FPS
Audio Coding	G.711ulaw
ONVIF Protocol	Support
Network Protocol	TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Multicast, Unicast
User	20 Users
SMART FEATURE-SET
Alerts	Motion detection, video tampering alarm, network disconnected, IP address conflict, illegal login, HDD full, HDD error
Behavior Analysis	Line crossing detection, intrusion detection, region entrance detection, region exit detection, Tempering
Line Crossing Detection	Cross a pre-defined virtual line
Intrusion Detection	Enter and loiter in a pre-defined virtual region
Region Entrance Appear	Enter a pre-defined virtual region from the outside place
Region Exiting, Disappear	Exit from a pre-defined virtual region
INTERFACE
Communication Interface	RJ45 10M, 100M Ethernet interface
On-board storage	Built-in Micro SD, SDHC, SDXC slot, up to 128 GB
Alarm	1Ch Alarm input, 1 Ch alarm output
Audio	1 Ch audio input, 1 Ch audio output
GENERAL
IR Distance	150m
Wiper	Built- in Wiper
Auto Temperature	Auto temperature Control with Heater & Blower
Bracket	Wall mount
OSD Menu	English
Timing function	Support
Power Supply	DC12V±10%, PoE Enabled (optional)
Power consumption	≤50W
Working Temp	-35℃ +60℃
Working Humidity	10–100% RH (condensing)
Protection Level	Secondary lightning protection, 3000V anti-surge design
Weight	5.5kg
Ingress Protection	IP67 Complaint, IP66 Certified EN/IEC 60529
Certification	Safety: CE, FCC, IS/EN:60950-1 Immunity: FCC